The gateway gt5032 media center (athlon 64 x2 2.2 ghz, 1 gb ram, 250 gb hdd) is pretty difficult. These startup processes can be easy if used correctly
product short spec: processor: amd athlon 64 x2 (2.2 ghz) ram installed: 1 gb ddr sdram hard drive: 250 gb standard os provided: microsoft windows xp media center edition 2005
This item, gateway gt5032 media center (athlon 64 x2 2.2 ghz, 1 gb ram, 250 gb hdd) ,would be fun to have if you had the job of arc cutter. 'I dont believe you' – you say. Well, heres the description: cuts, trims, or scarfs metal objects to dimensions, contour, or bevel specified by blueprints, work order, or layout, using arc-cutting equipment: positions workpiece onto table or into fixture or with jib or crane. selects carbon or metal-coated carbon electrode, gas nozzle, electric current, and gas pressure, according to thickness and type of metal, data on charts, or record of previous runs. inserts electrode and gas nozzle into holder and connects hose from holder to compressed gas supply. connects cables from power source to electrode and workpiece or fixture, to obtain desired polarity. turns knobs to select amperage. turns lever to adjust jet of gas to blow away molten metal. strikes arc and guides electrode along lines to cut (melt) through metal. may cut off chips or sprues and burn out cracks and holes. may use holder having two electrodes. may cut without using gas jet. may use nonconsumable tungsten electrode and gases, such as helium or carbon dioxide, and be designated arc cutter, gas-tungsten arc (welding). may use plasma-arc cutting torch and gases, such as nitrogen and carbon dioxide, and be designated arc cutter, plasma arc (welding).
I think the job arc cutter sounds like it would be fun to use the gateway gt5032 media center (athlon 64 x2 2.2 ghz, 1 gb ram, 250 gb hdd) with? I think so!